Rules & risk

Trailing drawdown: worked examples

By The Prop Navigator Editorial Team · Reviewed 31 October 2026 · 3 min read

Your progress is saved in this browser.
On this page
  1. Start with the fixed cash allowance
  2. Follow an uncapped trailing floor
  3. Separate intraday and end-of-day peaks
  4. Understand the lock point
  5. Monitor equity and the boundary together
  6. Build your own scenario record
  7. Frequently asked questions

A trailing drawdown rule is a moving boundary, not simply a percentage you may lose from your current balance. Two accounts can have the same advertised allowance and very different room after a profitable trade. The useful questions are what raises the boundary, when it updates and whether it eventually stops.

Key takeaways

  • Distinguish the high-water mark, the loss floor and current equity.
  • End-of-day updates do not imply loss monitoring happens only at the close.
  • A historical breach cannot be disproved by a later recovery.

Start with the fixed cash allowance

Use a fictional $100,000 starting balance and $5,000 allowance. The starting floor is $95,000. With a static rule, that floor stays fixed unless the agreement specifies a separate event such as an account reset. At $101,000 equity, the distance to this fixed floor is $6,000. The allowance and the current distance are different quantities. A percentage-based trailing rule needs different arithmetic from the fixed-cash examples here.

Follow an uncapped trailing floor

Suppose the eligible high-water mark becomes $103,000. Subtracting the same $5,000 allowance gives a $98,000 floor. If equity falls to $101,000, headroom is $3,000. The floor does not drop back to $96,000 just because the account has retraced. A later eligible peak of $107,000 produces a $102,000 floor. Returning to $101,000 would then be below it, even though the account remains above its original balance.

Separate intraday and end-of-day peaks

An intraday model may use the highest eligible equity, including unrealized profit. An end-of-day model may use eligible closing balances instead. If a session touches $103,000 but closes at $101,000, those models can set different next floors. Topstep’s published maximum-loss explanation is an example of a floor updated at day end while the limit is monitored in real time. This is a mechanics example, not a universal preset for every Topstep product.

Understand the lock point

Some floors stop trailing at the initial balance or at another specified offset. In a hypothetical lock-at-start model, a $107,000 peak and $5,000 allowance would normally imply $102,000, but the cap keeps the floor at $100,000. Never assume the cap exists. The product agreement may use a different offset, remove the cap in another phase or change behavior after a payout.

Monitor equity and the boundary together

Check whether the rule treats equality as a breach and which commissions, swaps and open losses enter equity. A current positive distance does not prove that equity stayed above the floor throughout the session. A recovered floating loss may already have triggered a rule. Keep a separate operating buffer for execution uncertainty instead of treating the calculated distance as a position budget.

Build your own scenario record

Write down the initial balance, fixed allowance, eligible peak, current equity, measurement clock and locking behavior. Use the drawdown calculator and follow the worked tutorial. Keep its export with the terms date. If your program uses percentage-of-peak allowances, profit adjustments or a special withdrawal reset, do not force it into the fixed-cash model; obtain the exact calculation first.

Frequently asked questions

Do these examples describe my firm’s exact rules?

No. Worked numbers are hypothetical. Confirm the current agreement for your exact program, phase, platform and account size.

How should I use this guide?

Apply the steps to a dated copy of your own terms, record unresolved questions and use the linked worksheet to check the arithmetic. A calculator does not establish eligibility or predict results.

Source references

These explain particular rule mechanisms. Current terms for your exact product remain authoritative.

This guide explains how prop firm programs commonly work. It is general information, not financial advice. Rules differ between firms and change over time, so always read the current terms of the program you are buying.

Continue this learning path

Protect your account: Learn how the loss floor moves and build an explicit trade-risk plan.

  1. Prop Firm Drawdown Rules Explained: Daily Loss, Max Loss, Static and Trailing
  2. Trailing drawdown: worked examples (this guide)
  3. Daily loss resets and open positions
  4. Position sizing and contract specifications
  5. Build a prop challenge risk budget
Explore all learning paths →
Affiliate partnerVSCapital
VSCapital — Trading through expertise. Start now.

We may earn a commission when you sign up through this partner link.